Removing The Dvd Traverse Mechanism Assembly - JVC DX-T7 Service Manual

3.2.6 Removing the DVD traverse mechanism assembly

(See Fig.11)
• Remove the tray assemblies and DVD servo board.
(1) From the bottom side of the DVD changer mechanism as-
sembly, remove the three screws F attaching the DVD
traverse mechanism assembly.
(2) Remove the wires from the section j.
(3) Take out the DVD traverse mechanism assembly from the
DVD changer mechanism assembly.
1-28 (No.MB368)
DVD changer mechanism assembly
F
F
DVD traverse mechanism assembly
Fig.11
j
F