How To Initialize The Setting - JVC Colour Video Monitor TM-A140E Instructions Manual

HOW TO INITIALIZE THE SETTING

SCREEN DISPLAY AND SELECTIONS IN THE
<SET-UP MENU> RESET MODE
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and
the volume level to their factory-set (initial) values.
1. Press the POWER (
—
OFF ( ).
ON
OFF
POWER
2. While pressing both MENU button and PHASE (
button, press the POWER (
_
ON ( ).
POWER
PHASE
MENU
3. Press the CONTRAST (
CONTRAST
10
) switch to turn the power
) switch to turn the power
The <SET-UP MENU> RESET screen is displayed.
ON Note:
OFF
● The <SET-UP MENU> RESET screen will not be
displayed if the MENU or PHASE buttons are pressed
for a very short time. Keep pressing them until the
display screen appears.
) button.
Initialization starts.
* The <SET-UP MENU> RESET screen disappears
automatically after fi nishing initialization.
Note:
● To cancel initialization.
Press the VOLUME/SELECT [+] or [–] buttons.
* The <SET-UP MENU> RESET screen disappears after
cancelling initialization.
<SET-UP MENU> RESET screen
<SET–UP MENU> RESET
Are you sure ?
"Yes" then <CONTRAST>
"No" then <+>
Initial settings
)
Functions (Items)
SHARPNESS
COLOR SYSTEM
H. POSITION
WHITE BALANCE
R. CUT OFF
G. CUT OFF
B. CUT OFF
R. DRIVE
B. DRIVE
CONTROL LOCK
PHASE
CHROMA
CONTRAST
BRIGHT
VOLUME
or <–>
Initialization
(setting)
00
AUTO
00
00
00
00
00
00
OFF
00
00
00
00
20