How To Initialize The Setting - JVC TM-A170G Operating Instructions Manual

HOW TO USE THE MENU
FUNCTIONS
(cont'd)
Set-up menu items Purpose
H. POSITION Adjusts the horizontal position of the
screen (+: Horizontal position shifts
to the right/-: Horizontal position shifts to
the left)
V. POSITION Adjusts the vertical position of the screen
(+: Vertical position moves up/-: Vertical
position moves down)
WHITE BALANCE Adjusts the white balance.
DRIVE R. DRIVE Adjusts red level.
B. DRIVE Adjusts blue level.
CUT OFF R. CUT OFF Adjusts red cut off.
G. CUT OFF Adjusts green cut off.
B. CUT OFF Adjusts blue cut off.
CONTROL LOCK Sets the operation buttons on the front
panel to control lock mode.
STATUS DISPLAY Sets the status display of the color system.
INPUT REMOTE Sets external control of input selection
(INPUT A/B).
ASPECT REMOTE Sets external control of the aspect ratio.
*1 Refer to HOW TO USE EXTERNAL CONTROL on page 14 for more details.
4. To set the other set-up menu items, repeat the
procedures 2 and 3.
5. Press the MENU button to quit.
Front panel Function
MENU
button displayed
Quits (or Releases) the <MENU>
MENU EXIT
screen
10
Settings
–5 –01 + 1 + 5
• • • 00 • • •
–5 –01 + 1 + 5
• • • 00 • • •
Selects the drive (DRV) or cut off (CUTO) adjustment. The selected
setting screen is shown. Select the function display for adjustment.
– 20 – 1 9 – 01 + 01 + 19 + 20
• • 00 • •
– 20 – 1 9 • • – 01 00 + 01 • • + 19 + 20
–20 –19 • • –01 00 + 01 • • + 19 + 20
+ 01 + 19 + 20
– 20 – 1 9 • • – 01 00 • •
–20 –19 –01 + 01 + 19 + 20
• • 00 • •
O F F O N
O F F O N
*1
O F F O N
*1
O F F O N
Notes:
● When the CONTROL LOCK function
is set to ON, pressing operation
buttons on the front panel will display
the message "CONTROL LOCK ON!"
on the screen for about 3 seconds.
● The CONTROL LOCK function is
maintained even when the power is
turned off.
Contents
● To turn off the CONTROL LOCK
function, while holding the MENU
button press the CHROMA/PHASE
button. Then set the CONTROL
LOCK function to OFF.
● Even when the CONTROL LOCK
function is set to ON, the following
operations are available:
– Power Switch operation
– Volume control with the VOLUME/
SELECT buttons
– Display or disappear of the <SET-
UP MENU> screen.
● The STATUS DISPLAY function can
be set to display (ON) or not display
(OFF) the present color system when
the power is turned on or the input
signal is changed. Refer to page 7 for
more information.
● When INPUT REMOTE is activated
(ON), and any one of the INPUT A
and B buttons is pressed, "REMOTE
ON!" appears on screen for about 3
seconds.
● To enable external control (the INPUT
or ASPECT RATIO function), set
INPUT REMOTE or ASPECT
REMOTE to ON.
HOW TO INITIALIZE THE
SETTING
SCREEN DISPLAY AND SELECTIONS IN THE
<SET-UP MENU> RESET MODE
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and
the volume level to their factory-set (initial) values.
1. Press the Power ( ) switch to turn the power
OFF (activate the standby mode).
POWER
2. While pressing both MENU button and CHROMA/
PHASE button, press the Power ( ) switch to turn
the power ON.
The <SET-UP MENU> RESET screen is displayed.
POWER
CHROMA MENU
Note:
PHASE
● The <SET-UP MENU> RESET screen will not be
displayed if the MENU or CHROMA/PHASE buttons are
pressed for a very short time. Keep pressing them until
the display screen appears.
3. Setting
Initialization is required.
Press the VOLUME/SELECT [+] button.
VOLUME/SELECT
* Initialization is completed, and the <SET-UP MENU>
RESET screen disappears.
Initialization is not required.
Press the MENU button.
MENU
* Initialization is aborted, and the <SET-UP MENU>
RESET screen disappears.
<SET-UP MENU> RESET screen
<SET–UP MENU> RESET
Are you sure ?
"Yes" then <+>
"No" then <MENU>
Initial settings
Initialization
Functions (Items)
(setting)
SHARPNESS 00
COLOR TEMP. 6500
COLOR SYSTEM AUTO
ASPECT RATIO 4 – 3
H. POSITION 00
V. POSITION 00
WHITE BALANCE
R. CUT OFF 00
G. CUT OFF 00
B. CUT OFF 00
R. DRIVE 00
B. DRIVE 00
CONTROL LOCK OFF
STATUS DISPLAY ON
INPUT REMOTE OFF
ASPECT REMOTE OFF
CHROMA 00
PHASE 00
CONTRAST 00
BRIGHT 00
VOLUME 20
11