Video Process; Mode Selection; Audio Output - Pioneer BDP-3120 Operating Instructions Manual

Video Process

• [Video Adjust]
Select a predefined set of the video.
1. Press ENTER .
2. Press c/ to adjust the video
Brightness, Contrast, Hue and Saturation.
{Brightness}- press c/ to adjust the
brightness of display, goes left means dark
and right means bright
{Contrast}- press c/ to adjust the
contrast of display, goes left means low
contrast and right means high contrast.
{Hue}- press c/ to adjust the Hue of
display, goes left means low hue and right
means high hue.
{Saturation}- press c/ to adjust the
saturation of display, goes left means low
Saturation and right means high saturation.
3. Press HOME MENU to exit the menu.
Brightness
Contrast
Hue
Saturation
Change
• [Sharpness]
Select the level of sharpness: High, Middle,
Low
{High} - Select High sharpness level.
{Middle} - Select Middle sharpness level.
{Low} - Select Low sharpness level.
Return

Mode selection

• [Detail]
Select the output mode of video,options
include: Standard, Fine, Soft, these can
change the output display.
{Normal} output video signal without any
processing and in standard mode.
{Fine} output video signal in Fine mode.
{Soft} output video signal in Soft mode.

Audio Output

1. Press HOME MENU.
[General Setting] menu is displayed.
2. Press  to select [Audio Output],
then press b .
3. Select an option, press  to access.
4. Press a/b to select a setup option and
press  .
5. Select the setting you wish to change
and press OK to confirm.
- Press c to return to the previous menu.
- Press HOME MENU to exit the menu.
05
33