Connecting An Av Receiver Or Amplifier; Connecting Video And Audio Cables; Connecting A Tv Using A Video/Audio Cable - Pioneer BDP-3220K Operating Instructions Manual

Blu-ray 3d player
Table of Contents

Advertisement

Connecting an AV receiver or
amplifier
Connect to an AV receiver or amplifier in order to enjoy
the surround sound of Dolby TrueHD, Dolby Digital Plus,
Dolby Digital, DTS-HD Master Audio, DTS-HD High
Resolution Audio or DTS Digital Surround. For
instructions on connecting the TV and speakers to the AV
receiver or amplifier, refer to the operating instructions
for AV receiver or amplifier.
Caution
• Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Player's rear panel
HDMI OUT
LAN (10/100)
To HDMI
input terminal
AV receiver
or amplifier
From HDMI
output
terminal
Match the direction
of the plug to the
terminal and insert
straight.
To HDMI input
terminal
TV
Direction of signal flow
Connecting video and
audio cables
Note
• Make the settings in the Setup Navigator menu
according to the type of cable connected (page 18).
• To output video signals from this player, connect
using a video cable (not including when connected
using an HDMI cable).
Connecting a TV using a
video/audio cable
Caution
• Connect the player's video output directly to
your TV.
This player supports the analog copy protection
technology. Therefore, the picture may not be
displayed properly if this player is connected to a TV
via a DVD recorder/video deck or when playing the
player's output material that is recorded by a DVD
recorder/video deck. Furthermore, the picture may
not be displayed properly due to the copy protection
when the player is connected to a TV with a built-in
video deck. For details, contact the manufacturer of
your TV.
Player's rear panel
White
Yellow
L
Red
R
VIDEO OUT
AUDIO OUT
HDMI OUT
Direction of
signal flow
To video/audio input terminals
TV
Note
• Depending on the output video resolution setting, the
picture may not be output.
LAN (10/100)
It is also possible to connect to
an AV receiver or amplifier.
Connect the audio signals using
an coaxial digital audio cable or
an audio cable (2 channels) (on
the right column).
02
15
En

Advertisement

Chapters

Table of Contents
loading

Table of Contents