Network; Others - Pioneer BDP-3120 Operating Instructions Manual

Problem Check
Is HDMI CEC set to
On on the connected
device?
Are multiple players
connected?

Network

Problem
BD-LIVE function
(connection to the
Internet) cannot be
used.
A message other than
"Networks is OK." is
displayed when
Connection Test is
performed.

Others

Problem
The player's power
turns off automatically.
The player's power
turns on automatically.
Remedy
Set HDMI CEC to On on the connected device. The HDMI
CEC function operates when HDMI CEC is set to On for all
devices connected to the HDMI OUT terminal. Once
connections and settings of all the devices are finished, be
sure to check that the player's picture is output to the Flat
Screen TV. (Also check after changing the connected
devices and connecting and/or disconnecting HDMI
cables.) If the player's picture is not being output to the Flat
Screen TV, the HDMI CEC function may not work properly.
For details, refer to the operating instructions of the
connected device.
The HDMI CEC function may not work if three or more
players, including this player, are connected by HDMI
cable.
Check Remedy
• Check your network connection or confirm your network
settings.
• The USB flash drive of files have been cleaned.
• Confirm BD-ROMs to support BD-Live function.
Is "Network is • Check that this player and the Ethernet hub (or router
with a hub functionality) are properly connected.
FAILED."
displayed? • If the IP address is obtained using the DHCP server
function, check the setting is correct at the Information. For
details on the DHCP server function, see the operating
instructions for the Ethernet hub (or router with a hub
functionality).
• Set the IP address manually.
• Check the operation and settings of the DHCP server
function of the Ethernet hub (or router with hub
functionality). For details on the DHCP server function, see
the operating instructions for the Ethernet hub (or router
with a hub functionality).
• If this player has been set manually, reset the IP address
of this player or other components.
• Check the settings and operation the Ethernet hub (or
Is the Ethernet hub
(or router with a router with a hub functionality). For details, see the
hub functionality) operating instructions for the Ethernet hub.
operating properly? • Reboot the Ethernet hub (or router with a hub
functionality).
Check Remedy
The player's power may turn on together with the power of
Is HDMI CEC set
to On?
the TV connected to the HDMI OUT terminal. If you do not
want the player's power to turn off when the TV's power is
turned on, set HDMI CEC to Off.
Is Auto Power Off If Auto Power Off is set to 10 min/20 min/30 min, the
set to 10 min/20 player's power turns off automatically if no operation is
min/30 min? performed for over 30 minutes.
The player's power may turn on together with the power of
Is HDMI CEC set
to On?
the TV connected to the HDMI OUT terminal. If you do not
want the player's power to turn off when the TV's power is
turned on, set HDMI CEC to Off.
06
41