Video Output; Display Setting - Pioneer BDP-3120 Operating Instructions Manual

Default Gateway and DNS.
05
• [Connection Test]
Display network connection message.
• [IP Setting]
{Auto} – Auto obtain network information.
{Manual} – Manual setup network
information.
• [BD-Line Connection]
{Permitted} – During playback BD-Live disc,
the disc may automatically downloading all
information from appointed network.
{Partial Permitted} – During playback BD-
Live disc, the disc may automatically
downloading the part of information from
appointed network.
{Prohibited} – Disable downloading
information from network.

Video Output

1. Press HOME MENU.
[General Setting] menu is displayed.
2. Press  to select [Video Output], then
press b.
3. Select an option, press  to access.
4. Press a/b to select a setup option and
press .
5. Select the setting you wish to change
and press OK to confirm.
- Press c to return to the previous menu.
- Press HOME MENU to exit the menu.

Display Setting

• [TV Aspect Ratio]
Select Video output Aspect Ratio according
to your TVs spec.
{16:9 Full} – Select this when connecting to a
wide (16:9) TV.
{16:9 Normal} – Select this when connected
to a wide (16:9) TV. 4:3 pictures are displayed
with vertical black bars along the sides.
{4:3 Pan&Scan} – Select this when
connecting to a 4:3 screen TV and playing a
16:9 video. The video will be played with the
left and right sides of the image cut off to
display on the 4:3 screen. (This function works
32
if the disc is labeled for 4:3PS.)
{4:3 Letterbox} – Select this when connecting
to a 4:3 screen TV and playing a 16:9 video.
The video will be played with black bands at
the top and bottom.
• [Video Resolution]
Select a video output resolution that is
compatible with your TV display capability.
{Auto} – Select the most suitable resolution
according to the input video.
{480I/576I},{480P/576P}, {720P}, {1080I},
{1080P} – Select a video resolution setting
that is best supported by the TV, See TV
manual for details.
• [Color Space]
Select a predefined color space of picture.
{RGB} – Select this to output the video
signals as RGB signals. Choose FULL RGB if
the colors seem too dense and all the dark
colors are displayed in a uniform black when
RGB is selected.
{YCbCr} – Select the video output YCbCr
color space.
{YCbCr422} – Select the video output
YCbCr422 color space
{Full RGB} – Select this to output the video
signals as RGB signals. Choose this if the
colors seem too faint and the black seems too
bright when FULL RGB is selected.
• [HDMI Deep Color]
This feature is available only when the display
device is connected by a HDMI cable, and
when it supports deep color feature.
{30 bits} – Output 30 bits color.
{36 bits} – Output 36 bits color.
{Off} – Output standard 24 bit color.
• [1080/24P output]
{On} – Enable to select this video resolution
setting.
{Off} – Disable to select this video resolution
setting.
About HDMI 1080p 24F Notes:
• If you want the 24Hz output, it should fulfill
below 3 conditions:
1.TV supports the 24Hz display:
2.Player choose the 24Hz option in the
setup menu;
3.Media must be the 24Hz video.
Notes:
• This resolution becomes effective only
when the playing BD-Disc contents are Film
source.
• During HDMI 1080p 24F playback, there
will be no composite output.