Table of Contents
Advertisement
Chapter 3
Getting Started
Making settings using the Setup Navigator menu
Be sure to perform these settings when using
the player for the first time.
Notes:
• Before turning on the power, check that the
connections between the player and other
devices are correct. Also, turn on the power
of the devices connected to the player
before turning on the player's power.
• When using a Flat Screen TV or front
projector compatible with the HDMI CEC
function, set HDMI CEC to On on the
connected device before turning on the
player's power.
1 Turn on the TV's power and switch the
input.
See the TV's operating instructions for
instructions on operating the TV.
2 Turn on the player's power.
Press STANDBY/ON.
Check that the Setup Navigator menu is
displayed.
* If the Setup Navigator menu is not
displayed
Press HOME MENU to display the Home
Menu, select General setting d System d
Setup Navigator, then press ENTER.
3 Select the OSD language.
Use a/b to select, then press ENTER.
When a Pioneer Flat Screen TV that is
compatible with HDMI CEC is connected to
this player's HDMI OUT terminal, language
settings are imported from the Pioneer Flat
Screen TV's language settings before Setup
Navigator begins.
4 Select and set the video and audio
output terminals.
Use a/b to select, then press ENTER. See
page 32.
5 Select the aspect ratio of your TV.
Use a/b to select, then press ENTER. See
page 32.
6 Finish the Setup Navigator menu.
Press ENTER.
To redo the settings from the start, select Go
Back.
03
17
Hide quick links:
Advertisement
Table of Contents
