Pioneer BDP-3120 Operating Instructions Manual page 40

06
Problem
Multi-channel sound
is not output.
Noise can be heard
when outputting
DTS Digital
Surround signals
from the DIGITAL
OUT terminal.
192 kHz or 96 kHz
digital audio signals
cannot be output
from the DIGITAL
OUT terminal.
Secondary audio or
interactive audio is
not output.
After a disc is
inserted, Loading
stays displayed and
playback does not
start.
■ is displayed in file
names, etc.
A message
indicating low
memory appears
while playing a
BD-ROM disc.
HDMI CEC function
does not work.
40
Check
Is the audio output of
the connected AV
receiver or amplifier,
etc., properly set?
Is multi-channel sound
selected?
Is the connected AV
receiver or amplifier
compatible with DTS
Digital Surround?
Is HDMI Audio properly
set?
Are Digital Output
properly set?
Are there too many files
recorded on the disc?
Is the HDMI cable
properly connected?
Is the HDMI cable you
are using a High Speed
Cable?
HDMI ® / TM
Is HDMI CEC set to On
on the player?
Does the connected
device support the
HDMI CEC function?
Remedy
Read the operating instructions of the connected AV
receiver or amplifier and check the audio output settings
of AV receiver or amplifier.
Use the menu screen or AUDIO to switch the disc's
sound to multi-channel.
If an AV receiver or amplifier that is not compatible with
DTS Digital Surround is connected to the DIGITAL OUT
terminal, set DTS Digital Surround and HDMI Surround
to PCM.
• Copyright-protected audio is converted to 48 kHz or
less before output.
• Set Downsampling to 96 kHz or 192 kHz.
When listening to the sound from an HDMI OUT
terminal, set HDMI Audio to PCM.
When listening to the sound from an DIGITAL OUT
terminal, set Digital Output to Re-encode or PCM.
When a disc on which files are recorded is inserted,
depending on the number of files recorded on the disc,
loading may take several dozen minutes.
The characters that cannot be displayed on this player
are displayed in ■. When you are input characters via
media and peripheral equipment ,etc. The characters
which include simplified character of part or all simplified
character is no true display.
• Connect a USB device.
• Erase the data stored on the connected USB device
from BUDA Setup.
To use the Control function, connect the Flat Screen TV,
and AV system (AV receiver or amplifier, etc.) and HD
AV Converter to the HDMI OUT terminal.
Use a High Speed HDMI
may not work properly if an HDMI cable other than a
High Speed HDMI ® / TM Cable is used.
Set HDMI CEC to On on the player.
• The HDMI CEC function will not work with devices of
other brands that do not support the HDMI CEC function,
even when connected using an HDMI cable.
• The HDMI CEC function will not work if devices that do
not support the HDMI CEC function are connected
between the HDMI CEC-compatible device and the
player.
• See About connections to components of other makes
supporting the HDMI CEC function on page13.
• Even when connected to a Pioneer product compatible
with the HDMI CEC function, some of the functions may
not work. Also refer to the operating instructions of the
connected device.
® TM
/ Cable. The Control function