Table of Contents
Advertisement
Chapter 3
Getting Started
Making settings using the Setup Navigator menu
Be sure to perform these settings when using
the player for the fi rst time.
Notes:
• Before turning on the power, check that the
connections between the player and other
devices are correct. Also, turn on the power
of the devices connected to the player
before turning on the player's power.
• When using a Flat Screen TV or front
projector compatible with the Control
function, set Control with HDMI to On on
the connected device before turning on the
player's power.
1 Turn on the TV's power and switch the
input.
See the TV's operating instructions for
instructions on operating the TV.
2 Turn on the player's power.
Press STANDBY/ON.
Check that the Setup Navigator menu is
displayed.
* If the Setup Navigator menu is not
displayed
Press HOME MENU to display the Home
Menu, select General setting System
Setup Navigator, then press ENTER.
3 Select the OSD language.
Use to select, then press ENTER.
page：2/5
Choose
an OSD language before starting.
The language selected will be applied not only here
but aslo in other OSD windows, menus etc.
Previous
When a Pioneer Flat Screen TV that is
compatible with Control is connected to
this player's HDMI OUT terminal, language
settings are imported from the Pioneer Flat
Screen TV's language settings before Setup
Navigator begins.
Setup Nevigator
中文(繁体)
English
Next
OK
4 Select and set the video and audio
output terminals.
Use to select, then press ENTER. See
page 32.
page：3/5
Choose
a resolution that fit your TV.
Change will be applied immediately, you have 15s to
determine whether to save the setting or rollback to
prior resolution. Better performance will be provided
by a HDMI connection!
Previous
5 Select the aspect ratio of your TV.
Use to select, then press ENTER. See
page 32.
6 Finish the Setup Navigator menu.
Press ENTER.
To redo the settings from the start, select Go
Back.
Setup Nevigator
自动
480p/576p
720p
1080i
1080p
Next
OK
17
03
Advertisement
Table of Contents
