Selecting Messages - Furuno NX-300 Operator's Manual

Navtex receiver
Hide thumbs Also See for NX-300:
Table of Contents

Advertisement

d)
Press ! or " to select RECEIVE or IGNORE depending on whether you want to select or
deselect the station.
e)
Press the [ENT] key.
f)
Repeat steps b) to e) to select or deselect other stations.
g)
Press the [MENU] key or [DISP] key to close the STATION SELECTION menu.
2.6

Selecting Messages

1.
Press the [MENU] key to open the main menu.
2.
Press ! or " to select MESSAGE SELECTION.
3.
Press the [ENT] key to show the MESSAGE SELECTION menu.
4.
Press ! or " to select a message you want to change the current setting.
5.
Press the [ENT] key to show the following window.
6.
When you change RECEIVE into IGNORE for message type A, B, D or L, the following
window appears to confirm. For all other message types proceed to step 8.
7.
Press # or $ to select YES or NO. Select YES to change the current setting, or NO not to
change.
8.
Press the [ENT] key.
9.
Repeat steps 4 to 8 to select or deselect other message types.
10. Press the [MENU] key or [DISP] key to close the MESSAGE SELECTION menu.
2-4
Figure 2-11 MESSAGE SELECTION menu
Figure 2-12 RECEIVE/IGNORE window
Figure 2-13 Ignore message window
www.Busse-Yachtshop.de
email: info@busse-yachtshop.de

Advertisement

Table of Contents
loading

Table of Contents