Transferring The Data To The Ip Gateway Card - Panasonic KX-TDA0480 Getting Started Manual

4.5 Transferring the Data to the IP Gateway Card

4.5 Transferring the Data to the IP Gateway Card
Upon finishing all DNS and Office Data configuration using the MCS, please follow the
procedure below to transfer the data to each Hybrid IP-PBX with IP Gateway Card in the
network.
Notes
• To transfer data using the following procedure, the Gateway parameters must have been
previously uploaded. Refer to 4.2.2 Creating a New Gateway (IP Gateway Card) for
details.
• When transferring the data, the IP Gateway Card must be connected to the LAN. Refer
to 2.2.2 10 Base-T Cable Connection for details.
32 Getting Started
1. Select the desired unit(s), then select "Unit"
"File Transfer".
2. Check "Config file (OFDD.VHO)", "DNS file
(DNS.DAT)", and "Reboot after the
transmission", then click [OK].