JVC RV-B55 BU Instructions Manual page 15

Direct access play (using the remote control unit)
÷ Pressing any of the track number buttons will start play from the
beginning of the designated track. (This function cannot be used during
programmed play.)
3
1
Programmed play (using the remote control unit)
÷ Up to 20 tracks can be programmed to be played in any required order.
The total playing time of programmed tracks is displayed (up to 99 minutes,
59 seconds).
(Example: When programming the 2nd track to be played first, and the
6th track next, then the 12th track, etc.)
SLEEP
DOWN UP SET
PROGRAM
RANDOM
AUTO
PRESET REPEAT
TUNER
AUX C D TAPE
BAND
FM MODE
REVERSE MODE FF
REW MULTI CONTROL
Press the CD 3/8 button to set to the CD mode.
1
Press the 7 button.
2
3
Press the PROGRAM button to set to the programming mode.
4
Press to designate the required track number.
Designate the remaining tracks by pressing the track number buttons.
Press the CD 3/8 button when programming is completed.
5
Programmed play starts.
To confirm the details of a program...
Press the PROGRAM button; the tracks making up the program will be
displayed in programmed order.
Track number
PROGRAM
TRACK
TIMER
CLOCK TIMER ON/OFF
SLEEP
DOWN UP SET
PROGRAM
RANDOM
AUTO
REPEAT
PRESET
TUNER
AUX C D TAPE
BAND
FM MODE
REVERSE MODE REW FF
MULTI CONTROL
1
C D
3
4
4
1, 5
2
Program order number
PROGRAM
Press the CD 3/8 button to set to the CD mode.
1
Press the 7 button.
2
3
Designate the required track using the track number buttons.
÷ To designate track numbers 1 to 10, press the track number button
corresponding to the track number.
÷ To designate track number 11 or higher, press the +10 button* the
required number of times, then a track number button.
Example:
(To designate the 20th track)
Press the +10 button once, then press track number button 10.
(To designate the 25th track)
Press the +10 button twice, then press track number button 5.
* +10 button:
Each time this button is pressed, the number increases by 10. First
press this button to set the 10's digit, then press the track number
button to set the 1's digit.
2
÷ To skip to another track during play
When the required track number button is pressed, the display shows
the designated track number and play starts from the beginning of the
designated track.
2 3
PROGRAM
To designate the 12th track.
The total playback time of programmed tracks is displayed.
To clear the programmed tracks...
Press the 7 button before playing a CD. During programmed play, press
this button twice. When the CD door is opened, programmed tracks are
cleared automatically.
Notes:
÷ If the total playing time of the programmed tracks exceeds 99 minutes
59 seconds, the total playing time indication will go out.
÷ No more than 21 tracks can be programmed for playback.
÷ When programming tracks to be recorded, the previous step
needed. Press the ONE TOUCH REC button instead of the CD 3/8
button.
÷ If the wrong track number is accidentally pressed, press the 7 button to
cancel it and perform the same operation from step
÷ If the power is set to STANDBY, the program is erased.
TRACK
PROGRAM
The 12th track
REC
TRACK
PROGRAM
3
5
C D
5
is not
.
15