Switching The Power On/Off - JVC RV-B55 BU Instructions Manual

SWITCHING THE POWER ON/OFF

Switching the power on/off
÷ Switching on:
ON/STANDBY
STANDBY
÷ Switching off:
ON/STANDBY
STANDBY
One touch operation (COMPU PLAY)
(only when AC power is used)
Even when the power is set to STANDBY, pressing the button shown
below switches on the power and selects the source.
C D
TAPE
BAND
TUNER
AUX
Notes:
÷ COMPU PLAY doesn't function when the unit is used with batteries or
a car adapter. Press the
exhaustion, the display window normally doesn't light. However, when
the button is pressed to turn on or an operation button is pressed,
the display window lights for 5 seconds.
÷ When switching off the power, be sure to press the
÷ The COMPU PLAY function on the remote control has the same function
as that on the main unit.
button
ON/STANDBY
AHB PRO ACS SOUND
PRESET ONE TOUCH
AUX TUNING REC
BEAT CUT
AUX button
The STANDBY indicator goes out.
The STANDBY indicator lights.
Function mode
When this button is pressed with a CD loaded, CD playback begins.
CD
When this button is pressed with a tape loaded, tape playback begins.
TAPE
TUNER
When this button is pressed, the tuner is engaged.
A sound source connected to the AUX IN terminal can be engaged.
AUX
button to turn on. To avoid battery
button.
CD 3/8 button
TUNER/BAND button
BAND
C D TAPE TUNER
MULTI CONTROL
AHB PRO ACS
STANDBY
REW FF
STOP
TAPE 23 button
÷ The display window lights. (when using DC power, it lights for only 5
seconds)
÷ The display window light goes off and only the clock time is displayed.
Operations
VOLUME
11