Clock Adjustment - JVC RV-B55 BU Instructions Manual

CLOCK ADJUSTMENT

(
USING THE REMOTE CONTROL UNIT)
Names of parts in the clock/timer section, and their functions:
1
Timer mode indicator
2
Timer indicator (ON/OFF)
3
SLEEP indicator
4
CLOCK indicator
5
Time display
Setting the current time (when this unit is used for the first
time)
(Example: To set the clock to 13:15.)
1
3
DOWN
1
Set the button to ON.
2
Press the CLOCK button; "
3
Set to 13:15 by pressing the DOWN/UP buttons.
(When the button is kept pressed, the minute/hour indication changes
continuously.)
4
Press the SET button; the time will light in the display.
÷ To set to the nearest second...
Press the SET button when you hear the time signal from a TV or
radio.
22
1 2 3 4 5
ON
OFF
2
CLOCK
UP
" will blink in the display.
6 7 8 9 p q
CLOCK
6
CLOCK button
7
TIMER button
8
TIMER ON/OFF button
9
DOWN/UP buttons
p
SET button
q
SLEEP button
Within 2 minutes.
Within 2 minutes.
÷ To confirm the time while listening to a CD or radio broadcast
Press the DISPLAY button briefly on the remote control unit. Press it
again to return to the previous display.
Notes:
÷ Before performing timer recording or playback, it is necessary to set
the current time.
÷ If memory back-up batteries are exhausted or not installed, and the
power cord is plugged in again after being disconnected, or power is
restored after a power failure, "CLOCK" will blink in the display. Set the
current time again.
TIMER
TIMER ON/OFF
SLEEP
DOWN UP SET
PROGRAM
4
SET