Mx7 Ii Options; Communication; Enable Tcp/Ip Version 6; Allow Remote Desktop Autologon - Honeywell MX7 Reference Manual

MX7 II Options
Set options such as IP V6, time sync, touchscreen enable and CapsLock. Also set Status Popup taskbar icon display options
for the Admin and User.
It may be necessary to warmboot the MX7 after making desired changes. A pop up window indicates if a warmboot is required.
Note: If there is no icon corresponding to this item in the Control Panel, contact your Honeywell
Representative for upgrade details.

Communication

Options on this tab configure communication options for the MX7.

Enable TCP/IP Version 6

By default, IPv6 is disabled on the Honeywell device. Check this checkbox to enable IPv6.

Allow Remote Desktop Autologon

By default, Remote Desktop Autologon is disabled. Check this checkbox to enable Remote Desktop Autologon.
Note: The .RDP file must be saved in the \System folder. When prompted, use the Save As button to save
the .RDP file is the \System directry. If the .RDP file is saved in the default root folder location, the
.RDP file will not persist across a warmboot.
4-103