Honeywell MX7 Reference Manual page 248

Parameter Default
Specify 802.11a, 802.11b and/or 802.11g rates when communicating with the AP. The options
displayed for this parameter depend on the type of radio (802.11b/g or 802.11a/b/g) installed in the
mobile device.
Options:
BG
radio:
BG
Rates
Full
Radio
Or
Mode
A radio:
BGA
Rates Default:
Full
Note:
It is important the Radio Mode parameter correspond to the AP to which the device is to connect. For example, if this
parameter is set to G rates only, the MX7 may only connect to APs set for G rates and not those set for B and G rates.
The options for the Radio Mode parameter should be set, based on the antenna configuration, as follows:
Antenna Configuration
A Main and BG Main
A Main and A Aux
BG Main and BG Aux
Contact your representative
7-10
B rates only (1, 2, 5.5 and 11 Mbps)
BG Rates Full (All B and G rates)
G rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
BG optimized or BG subset (1, 2, 5.5, 6, 11, 24, 36 and 54 Mbps)
A rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
ABG Rates Full (All A rates and all B and G rates with A rates preferred)
BGA Rates Full (All B and G rates and all A rates with B and G rates preferred)
Ad Hoc (when connecting to another client device instead of an AP)
BG Rates Full (for 802.11b/g radios)
BGA Rates Full (for 802.11a/b/g radio)
BG radio only – Previous SCU versions may have the default set as BG
Rates Full. Depending on the SCU version, either BG Optimized or BG
subset is the default.
Radio Mode
ABG Rates Full
BGA Rates Full
A Rates Only
B Rates Only
G Rates Only
BG Rates Full
BG Subset
if you have questions about the antenna(s) installed on your MX7.
Explanation