Chapter 8: Key Maps; 55 Key Alphanumeric Key Map - Honeywell MX7 Reference Manual

Chapter 8: Key Maps

Remember : "Sticky" keys are also known as "second" function keys. Ctl/Ctrl, Alt, Shft, Blue and Orange keys are "sticky
keys". Sticky keys do not need to be held down before pressing the next (or desired) key. It is valid to use combined modifiers
on specific keys.
The key mapping in this section relates to the
the stylus.

55 key Alphanumeric Key Map

The following keypad
l
emulators use a separate key map.
When using a sequence of keys that includes a sticky key, press the sticky key first, release it, then press the rest of
l
the key sequence.
When using a sequence of keys that includes the Orange or Blue keys, press the color key first then the rest of the key
l
sequence.
Tapping the Power key when in any sticky mode (Blue, Orange, Shift, etc.) either turns the device On (when Off) or
l
places it in Suspend (when On).
Alphabetic keys default to lower case letters. Press the Shft key, then the alphabetic key for an uppercase letter.
l
When the computer boots, the default condition of Caps (or CapsLock) is Off. The Caps (or CapsLock) condition can be
l
toggled with Blue plus Tab key sequence.
For those keymaps that require remapping (MAP), keys can be remapped using the Keypad Control Panel (Start >
l
Settings > Control Panel > Keypad).
To get this Key / Function
Power / Suspend
Field Exit (default VK_PAUSE)
MAP = Mappable
Volume Adjust Mode
Volume Adjust Mode
Display Backlight Brightness Adjust Mode
Toggle Blue Mode
Toggle Orange Mode
Toggle Shift Mode
Alt
Control
Esc
Space
Enter
physical
key map is used on an MX7 that is NOT running a Honeywell Terminal Emulator. Terminal
Power
Blue (MAP)
Orange
Blue
Blue
Blue
Orange
Shft
Alt
Ctl
Blue
Spc
Enter
keypad. See the Input Panel for the Virtual (or Soft) Keypad used with
Press these Keys in this Order
Orange (MAP)
Scan
V
Scan
Alt
Shift (MAP)
Up Arrow / Down Arrow
Up Arrow / Down Arrow
Diamond #1
8-1