Mx7 Bksp Primary Key Map - Honeywell MX7 Reference Manual

To get this Key / Function
%
^
^
&
(
(
)
)

MX7 Bksp Primary Key Map

Note: This keypad features a dedicated
The following key map is used on an MX7 that is NOT running a Honeywell Terminal Emulator. Terminal emulators use
l
a separate keymap.
When using a sequence of keys that includes a sticky key, press the sticky key first, release it, then press the rest of
l
the key sequence.
When using a sequence of keys that includes the Orange or Blue keys, press the color key first then the rest of the key
l
sequence.
Tapping the Power key when in any sticky mode (Blue, Orange, Shift, etc.) either turns the device On (when Off) or
l
places it in Suspend (when On).
Alphabetic keys default to lower case letters. Press the Shft key, then the alphabetic key for an uppercase letter.
l
When the computer boots, the default condition of Caps (or CapsLock) is Off. The Caps (or CapsLock) condition can be
l
toggled with Blue plus Tab key sequence.
For those keymaps that require remapping (MAP), keys can be remapped using the Keypad Control Panel (Start >
l
Settings > Control Panel > Keypad).
To get this Key / Function
Power / Suspend
Field Exit (default VK_PAUSE)
MAP = Mappable
Volume Adjust Mode
Volume Adjust Mode
Display Backlight Brightness Adjust Mode
Toggle Blue Mode
Toggle Orange Mode
Toggle Shift Mode
Alt
Control
Esc
Shft
Blue
Shft
Shft
Blue
Shft
Blue
Shft
Backspace key.
Power
Blue (MAP) Orange (MAP)
Orange Scan
Blue V
Blue Scan
Blue
Orange
Shft
Alt
Ctl
Blue Alt
Press these Keys in this Order
5
Ctrl
6
7
Diamond#2
9
Diamond#3
0 (zero)
Press these Keys in this Order
Shift (MAP)
Up Arrow / Down Arrow
Up Arrow / Down Arrow
Diamond #1
8-17