Other Convenient Tuner Functions; Scanning Broadcast Stations; Selecting Fm Reception Sound - JVC KD-SX940 Instructions Manual

Other convenient tuner functions

Scanning broadcast stations

When you press INT/SCAN (Intro/Scan for KD-SX949) or SCAN (Scan for KD-SX940) while
listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning
stops for about 5 seconds ("SCAN" flashes on the display), and you can check what program
is now being broadcast.
If you want to listen to that program, press the same button again to stop scanning.

Selecting FM reception sound

When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The MO (Mono)
indicator lights up on the display.
The sound you hear becomes monaural but reception will be improved.
MO/RND
To restore the stereo effect, press the same button again.
When using this unit in an area other than North or South America:
You need to change the AM/FM channel intervals. See "Changing the AM/FM channel
intervals" on page 25.
10
MO/RND
INT/SCAN (for KD-SX949)
Lights up when receiving an FM broadcast in stereo.
SCAN (for KD-SX940)