Auto Tracking - EverFocus EPN4122 User Manual

7.5.3 Auto Tracking

The camera can detect movement in the camera's field of view, for example a moving vehicle or
person. If auto tracking is enabled, the camera will automatically pan and tilt to follow the moving
object or, in case there is lots of simultaneous movement, the area with the most movement. Auto
tracking continues until the moving object stops or disappears from the monitored area. Movement
in areas blocked by privacy masks does not trigger auto tracking. To enable the Auto Tracking
function, please refer to Auto Tracking in 5. Live View Window.
Note: To best perform the Auto Tracking function, it is recommended to mount the PTZ camera
over 4 meters above the ground and to install it with a certain degree of depression angle.
【Auto Tracking Settings】
Auto Tracking Start Point: Check the box to enable a camera position to which the camera will
return to after a tracking operation.
To set up the Auto Tracking Start Point:
1. Move the camera view to a desired position.
2. Optionally move your cursor on the live view screen to adjust zoom or focus (see 5. Live View
Window).
3. Click Set button to set the current position as the start point. Click Clear to clear this point or
click Go to test and see the selected Start Point on the screen.
4. The number of the Start Direction is to indicate the position of the Start Point.
Note: If the user did not set up a start point or the start point is disabled, the camera will go
back to track/monitor the initial point instead of the Auto Tracking Start Point, once the tracked
object exits in the camera's field of view.
76
EPN4122/4122i/4220/4220i