Dukane 9137WU-RJ User Manual page 64

NETWORK Menu
NETWORK Menu (continued)
Item
PROJECTOR
NAME
(continued on next page)
(1) Use the▲/▼ buttons on the NETWORK Menu to select the
PROJECTOR NAME menu and press the ► button. The
PROJECTOR NAME dialog will be displayed.
(2) The current PROJECTOR NAME
will be displayed on the first 3 lines.
If not yet written, the lines will be
blank.
Use the ▲/▼/◄/► buttons and
the ENTER or INPUT button to
select and enter characters. The
RESET button can be used to
erase 1 character at a time. Also if
you move the cursor to DELETE or
ALL CLEAR on screen and push
the ENTER or INPUT button, 1
character or all characters will be
erased.
The PROJECTOR NAME can be
input up to 64 characters.
(3) To change an already inserted
character, press the ▲/▼ button to
move the cursor to one of the first 3
lines, and use the ◄/► buttons to
move the cursor on the character
to be changed. After pressing
the ENTER or INPUT button, the
character is selected. Then, follow
the same procedure as described at
the item (2) above.
(4) To finish entering text, move the
cursor to the SAVE on screen
and press the ENTER or INPUT
button. To revert to the previous
PROJECTOR NAME without saving
changes, move the cursor to the
CANCEL on screen and press the
ENTER or INPUT button.
Description
62