Dukane 9137WU-RJ User Manual

Lcd data video projector
Hide thumbs Also See for 9137WU-RJ:
Table of Contents

Advertisement

Quick Links

LCD Data Video Projector
Information in this Guide may change due to product improvements. To obtain the latest
manuals, literature, and software please visit the Dukane web site at; www.dukane.com/av
and look at the specific model SUPPORT or DOWNLOADS section.
DUKANE CORP AV SERVICE DEPT
2900 Dukane Drive
St Charles, IL 60174
800-676-2487 / 630-762-4032
Fax 630-584-5156
avservice@dukane.com
www.dukane.com/av
User's Manual
MODEL 9137WU-RJ
403-9137WU-RJ- General-00

Advertisement

Table of Contents
loading

Summary of Contents for Dukane 9137WU-RJ

  • Page 1 Information in this Guide may change due to product improvements. To obtain the latest ion that brings you the following main features. manuals, literature, and software please visit the Dukane web site at; www.dukane.com/av and look at the specific model SUPPORT or DOWNLOADS section.
  • Page 3: About This Manual

    Projector 137WU-RJ User's Manual (detailed) – Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read the "User's Manual - Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual.
  • Page 4: Table Of Contents

    Contents Contents   About this manual . . . . . . . . . . . 1 (EASY MENU continued ..28) Contents .
  • Page 5: Projector Features

    Projector features / Preparations Projector features This projector has a capability to project various picture signals onto a screen. This projector requires only a minimal amount of space for installation and can produce a large projected image from even a short distance. Moreover, the projector has the following features to extend its potentiality for broad use.
  • Page 6: Part Names

    Part names Part names Projector HOT! (1) Speakers (x 2) (41) (2) Focus ring (20) (3) Zoom ring (20) (11) (4) Lamp cover (66) The lamp unit is inside. (15) (5) Lens shift cover (20) HOT! (6) Horizontal lens shift dial (20) (12) (7) Vertical lens shift dial (20) (14)
  • Page 7: Control Panel

    Part names Control panel (1) STANDBY/ON button (17) (2) MENU button (26) It consists of four cursor buttons. (3) INPUT button (18) (4) POWER indicator (17, 72) (5) TEMP indicator (72) (6) LAMP indicator (72) Rear panel (1) Shutdown switch (74) (2) Security slot (9) (3) Security bar (9) (4) AC IN (AC inlet) (12)
  • Page 8: Remote Control

    Part names Remote control LASER (1) Laser pointer (13) INDICATOR STANDBY/ON VIDEO (14) It is a beam outlet. MY SOURCE/ DOC.CAMERA (2) LASER INDICATOR (13) SEARCH (3) LASER button (13) (4) STANDBY/ON button (17) (17) BLANK LASER (5) VOLUME+/- buttons (18) (6) MUTE button (18) (26) (7) VIDEO button (19)
  • Page 9: Setting Up

    Setting up Setting up Install the projector according to the environment and manner the projector will be used in. WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over, it could cause injury and/or damage to the projector.
  • Page 10: Arrangement

    Setting up Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1920×1200 (a) Screen size (diagonal) (b) Projection distance (±10%) (c) Screen height (±10%), when the vertical lens shift (20) is set full upward. On a horizontal surface (c) up...
  • Page 11: Adjusting The Projector's Elevator

    RGB1 RGB2 M1-D Setting up VIDEO Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the REMOTE CONTROL elevator feet to place the projector horizontally. AUDIO S-VIDEO (3.5Φ) CONTROL AUDIO IN 3 AUDIO IN 4 Using the feet can also tilt the projector in order to project at...
  • Page 12: Connecting Your Devices

    Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them.
  • Page 13 Setting up Connecting your devices (continued) NOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Be sure to consult to the administrator of the network.
  • Page 14: Connecting Power Supply

    Setting up Connecting power supply Connect the connector of the power cord to the AC IN (AC inlet) of the projector. Firmly plug the power cord's plug into the outlet. AC IN Connector of the power cord to the outlet WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.
  • Page 15: Remote Control

    Remote control Remote control Laser pointer This remote control has a laser pointer in place of a finger or rod. The laser beam works and the LASER INDICATOR lights while the LASER button is pressed. LASER INDICATOR LASER button WARNING ►The laser pointer of the remote control is used in place of a finger or rod.
  • Page 16: About The Remote Control Signal

    Remote control About the remote control signal The remote control works with the projector’s remote sensors. This projector has three remote sensors on the front, on the top, and on the back. The sensors can be respectively turned active or inactive using the “REMOTE RECEIV.”...
  • Page 17: Using As A Wired Remote Control

    AC IN Remote control Using as a wired remote control The accessory remote control works as a wired remote control, RGB1 HDMI when the wired control port at the bottom of the remote control VIDEO AUDIO IN1 RGB2 AUDIO IN2 connects with the REMOTE CONTROL port on the back of the projector via an audio cable with 3.5 diameter stereo mini plugs.
  • Page 18 Remote control Using as a simple PC mouse & keyboard (continued) NOTE • This function is not available in any of the following cases: - While the lamp is warming up. (The POWER indicator blinks in green.) - While displaying BLANK (24), TEMPLATE (46) or MY IMAGE (63) screen.
  • Page 19: Power On/Off

    Projector features / Preparations Power on/off Power on/off STANDBY/ON button POWER indicator Turning on the power LASER INDICATOR STANDBY/ON VIDEO MY SOURCE/ DOC.CAMERA Make sure that the power cord is firmly and SEARCH BLANK LASER correctly connected to the projector and the outlet. ASPECT Remove the lens cover, and set the power switch PUSH...
  • Page 20: Operating

    BLANK LASER Operating LASER INDICATOR STANDBY/ON VIDEO Operating MY SOURCE/ ASPECT DOC.CAMERA Adjusting the volume SEARCH PUSH ENTER PAGE UP PAGE DOWN Use the VOLUME + / VOLUME - buttons to adjust the BLANK LASER MENU RESET volume. POSITION AUTO PbyP A dialog will appear on the screen to aid you in adjusting the MAGNIFY...
  • Page 21: Searching An Input Signal

    Operating Selecting an input signal (continued) Press the VIDEO button on the remote control to select an input for video signal. LASER INDICATOR STANDBY/ON VIDEO Each time you press the button, the projector switches its MY SOURCE/ video input port as below. DOC.CAMERA COMPONENT (Y, C ) ...
  • Page 22: Adjusting The Zoom And Focus

    Operating Adjusting the zoom and focus Focus ring Zoom ring Use the zoom ring to adjust the screen size. Use the focus ring to focus the picture. Adjusting the lens shift Lens shift cover Use the vertical lens shift dial to shift the picture upward or downward.
  • Page 23: Adjusting The Position

    BLANK LASER Operating Adjusting the position ASPECT PUSH ENTER Press the POSITION button on the remote control when no PAGE UP PAGE DOWN menu is indicated. MENU RESET The “POSITION” indication will appear on the screen. LASER POSITION AUTO INDICATOR PbyP Use the ▲/▼/◄/►...
  • Page 24 Operating Correcting distortion (continued) (2) MANUAL displays a dialog for keystone correction. Use the ◄/► cursor buttons to select the direction to correct ( ) then use the ▲/▼ buttons for adjustment. Even if you do not do anything, the dialog will automatically disappear after a few seconds.
  • Page 25: Using The Magnify Feature

    Operating ASPECT Using the magnify feature ENTER PUSH PAGE UP PAGE DOWN Press the ON button of MAGNIFY on the remote control. MENU RESET The “MAGNIFY” indication will appear on the screen and PbyP POSITION AUTO the projector will go into the MAGNIFY mode. When the MY BUTTON VOLUME MAGNIFY...
  • Page 26: Temporarily Blanking The Screen

    Operating Temporarily blanking the screen LASER INDICATOR STANDBY/ON VIDEO Press the BLANK button on the remote control. MY SOURCE/ DOC.CAMERA The blank screen will be displayed instead of the screen of SEARCH input signal. Please refer to the BLANK item in SCREEN Menu (42).
  • Page 27: Pbyp (Picture By Picture)

    Operating PbyP (Picture by Picture) The PbyP is a function to display two different picture signals on a screen that is split in two areas for each signal. Some of functions can be used with the same operation as it for the normal mode (not in the PbyP mode). There are some operations available only in the PbyP mode.
  • Page 28: Using The Menu Function

    LASER INDICATOR STANDBY/ON VIDEO Operating MY SOURCE/ DOC.CAMERA Using the menu function SEARCH This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, BLANK LASER NETWORK, C.C. and EASY MENU. The EASY MENU consists of functions often used, and the other menus are classified into each purpose and brought together as the Advanced Menu.
  • Page 29: Easy Menu

    EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. Item Description Using the ◄/►...
  • Page 30: (Easy Menu Continued

    EASY MENU EASY MENU (continued) Item Description Using the ◄/► buttons adjusts the brightness. BRIGHTNESS See the BRIGHTNESS item in PICTURE Menu (29). Using the ◄/► buttons adjusts the contrast. CONTRAST See the CONTRAST item in PICTURE Menu (29). Using the ◄/► buttons adjusts the strength of whole color. COLOR See the COLOR item in PICTURE Menu (30).
  • Page 31: Picture Menu

    PICTURE Menu PICTURE Menu From the PICTURE Menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item.
  • Page 32 PICTURE Menu PICTURE Menu (continued) Item Description Using the ▲/▼ buttons switches the color temperature mode. #1 HIGH#1 CUSTOM#2 MID#2 CUSTOM#3 LOW #3 CUSTOM #6 CUSTOM #6 Hi-BRIGHT-3 #4 Hi-BRIGHT-1 #5 CUSTOM  #5 Hi-BRIGHT-2  #4 CUSTOM To adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ►...
  • Page 33 PICTURE Menu PICTURE Menu (continued) Item Description Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENTATION ó THEATER ó TURN OFF Feature The active iris displays the best presentation PRESENTATION ACTIVE IRIS image for both bright and dark scenes. The active iris displays the best theater image for THEATER both bright and dark scenes.
  • Page 34: Image Menu

    IMAGE Menu IMAGE Menu From the IMAGE Menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
  • Page 35 IMAGE Menu IMAGE Menu (continued) Item Description Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker. Right ó Left H PHASE • This item can be selected only for an RGB signal or a component video signal. (except 480i@60, 576i@50, SCART RGB input. ) Using the ▲/▼...
  • Page 36: Input Menu

    INPUT Menu INPUT Menu From the INPUT Menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
  • Page 37 INPUT Menu INPUT Menu (continued) Item Description Using the ▲/▼ buttons switches the function of the COMPONENT (Y, C ) port. COMPONENT ó SCART RGB When the SCART RGB is selected, the COMPONENT (Y, C ) and VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable is required for a SCART RGB input to the projector.
  • Page 38 INPUT Menu INPUT Menu (continued) Item Description Set the frame lock function on/off for each port. (1) Use the ▲/▼ buttons to select one of following ports. QUIT ó RGB1 ó RGB2 ó HDMI (2) Use the ◄/► buttons to turns the frame FRAME LOCK lock function on/off .
  • Page 39 INPUT Menu INPUT Menu (continued) Item Description The resolution for the RGB1 and RGB2 input signals can be set on this projector. (1) In the INPUT Menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu select the resolution you wish to display using the ▲/▼...
  • Page 40: Setup Menu

    SETUP Menu SETUP Menu From the SETUP Menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item.
  • Page 41 SETUP Menu SETUP Menu (continued) Item Description Using the ▲/▼ buttons corrects the horizontal keystone distortion. Shrink the right of the image ó Shrink the left of the image • The adjustable range of this function will vary among inputs. For some input, this function may not work well.
  • Page 42 SETUP Menu SETUP Menu (continued) Item Description Using the ▲/▼ buttons turns off/on the whisper mode. NORMAL ó WHISPER WHISPER • When the WHISPER is selected, acoustic noise and screen brightness are reduced. Using the ▲/▼ buttons switches the mode for mirror status. NORMAL ó...
  • Page 43: Audio Menu

    AUDIO Menu AUDIO Menu From the AUDIO Menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
  • Page 44: Screen Menu

    SCREEN Menu SCREEN Menu From the SCREEN Menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
  • Page 45 SCREEN Menu SCREEN Menu (continued) Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature Screen can be registered by the MyScreen item MyScreen...
  • Page 46 SCREEN Menu SCREEN Menu (continued) Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure.
  • Page 47 SCREEN Menu SCREEN Menu (continued) Item Description Using the ▲/▼ buttons turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting “NO INPUT IS DETECTED” “SYNC IS OUT OF RANGE”...
  • Page 48 SCREEN Menu SCREEN Menu (continued) Item Description Using ▲/▼ buttons switches the mode for the template screen. The selected template pattern can be displayed when the MY BUTTON allocated TEMPLATE to the TEMPLATE function is pressed (49). DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2 TEST PATTERN ó...
  • Page 49: Option Menu

    OPTION Menu OPTION Menu From the OPTION Menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME.
  • Page 50 OPTION Menu OPTION Menu (continued) Item Description Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically. AUTO OFF When the time is set to 1 to 99, and when the passed time with no- signal or an unsuitable signal reaches at the set time, the projector...
  • Page 51 OPTION Menu OPTION Menu (continued) Item Description This item is to assign one of the following function to MY BUTTON 1 and 2 on the remote control (6). Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼...
  • Page 52 OPTION Menu OPTION Menu (continued) Item Description AUTO ADJUST Using the ▲/▼ buttons to select one of the mode. When the DISABLE is selected, the automatic adjustment feature is disabled. FINE ó FAST ó DISABLE FINE: Finer tuning including H.SIZE adjustment. FAST: Faster tuning, setting H.SIZE to prearranged data for the input signal.
  • Page 53 OPTION Menu OPTION Menu (continued) Item Description KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the STANDBY/ON button are locked. TURN ON ó TURN OFF •...
  • Page 54 OPTION Menu OPTION Menu (continued) Item Description This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD 1.1-1 Use the ▲/▼ buttons on the OPTION Menu to select SECURITY and press the ►...
  • Page 55: Using The Myscreen Password Function

    OPTION Menu OPTION Menu (continued) Item Description 1.3 If you have forgotten your PASSWORD 1.3-1 Follow the procedure in 1.1-1 to display the ENTER PASSWORD BOX. 1.3-2 While the ENTER PASSWORD BOX is displayed, press and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT button for 3 Inquiring Code...
  • Page 56: Using The Pin Lock Function

    OPTION Menu OPTION Menu (continued) Item Description 2.2-4 Move the cursor to the right side of the PASSWORD AGAIN BOX and press the ► button to display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time. NOTE PASSWORD Pressing the ENTER button on the remote control or INPUT button on the projector will return to...
  • Page 57 OPTION Menu OPTION Menu (continued) Item Description 3.1-3 Input a 4 part PIN Code using the ▲/▼/◄/►/ RGB and INPUT buttons. The PIN CODE AGAIN BOX will appear. Reenter the same PIN Code. This will PIN BOX complete the PIN Code registration. •...
  • Page 58: Using The Transition Detector Function

    OPTION Menu OPTION Menu (continued) Item Description 4. Using the Transition Detector Function While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below. • Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.
  • Page 59: Using The My Text Password Function

    OPTION Menu OPTION Menu (continued) Item Description 4.3 Setting the Transition Detector off 4.3-1 Follow the procedure in 4.1-1 to display the Transition Detector on/off menu. 4.3-2 Select TURN OFF to display the ENTER PASSWORD BOX (large). Enter the registered PASSWORD and the screen will return to the Transition Detector on/off menu.
  • Page 60 OPTION Menu OPTION Menu (continued) Item Description 5.2 Displaying the MY TEXT (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLAY menu and press the ► button to display the MY TEXT MY TEXT DISPLAY on/ DISPLAY on/off menu.
  • Page 61 OPTION Menu OPTION Menu (continued) Item Description 5.3-3 Turning the MY TEXT PASSWORD off (1) Follow the procedure in 5.3-1 to display the MY TEXT PASSWORD on/off menu. (2) Select TURN OFF to display the ENTER PASSWORD BOX (large). Enter the registered ENTER PASSWORD BOX PASSWORD and the screen will return to the (large)
  • Page 62: Uto Off

    NETWORK Menu NETWORK Menu Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. Select “NETWORK” from the main menu to access the following functions.
  • Page 63 NETWORK Menu NETWORK Menu (continued) Item Description Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF. ADDRESS • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network.
  • Page 64 NETWORK Menu NETWORK Menu (continued) Item Description (1) Use the▲/▼ buttons on the NETWORK Menu to select the PROJECTOR NAME menu and press the ► button. The PROJECTOR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the first 3 lines. If not yet written, the lines will be blank.
  • Page 65 NETWORK Menu NETWORK Menu (continued) Item Description Selecting this item displays the MY IMAGE menu. The application software “PJImage” is required to store image(s) into the projector. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE (...
  • Page 66 NETWORK Menu NETWORK Menu (continued) Item Description Selecting this item displays the NETWORK -INFORMATION- dialog for confirming the network settings. INFORMATION • The PROJECTOR NAME is displayed. • Nothing (blank) is shown in the “PROJECTOR NAME” field until you setup the item (62). •...
  • Page 67: C.c. (Closed Caption) Menu

    C .C . (Closed Caption) Menu C.C. (Closed Caption) Menu The closed caption setting can be changed through C.C. Menu in the advance menu. Please select the item that you will change using ▲/▼ cursor buttons. • The C.C. (Closed Caption) is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds.
  • Page 68: Maintenance

    Maintenance Maintenance Lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended.
  • Page 69: Lamp Warning

    Maintenance Lamp (continued) Lamp warning HIGH TEMPERATURE HIGH PRESSURE HIGH VOLTAGE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
  • Page 70: Air Filter

    Maintenance Air filter Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. The air filter has two kinds of filters inside. Replace the filters when they are damaged or too soiled.
  • Page 71: Internal Clock Battery

    Maintenance Internal clock battery Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has stopped, please replace the battery according to the following procedures. Turn the projector off, and unplug the power cord. Allow the projector to cool suffi ciently.
  • Page 72: Other Care

    Maintenance Other care Inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. Caring for the lens If the lens is flawed, soiled or fogged, it could cause deterioration of display quality.
  • Page 73: Troubleshooting

    Troubleshooting Troubleshooting Related messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below. If the same message is displayed after the remedy, or if a message other than the following appears, please contact your dealer or service company.
  • Page 74: Regarding The Indicator Lamps

    Troubleshooting Regarding the indicator lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please follow the instructions within the table. If the same indication is displayed after the remedy, or if an indication other than the following is displayed, please contact your dealer or service company.
  • Page 75 Troubleshooting Regarding the indicator lamps (continued) POWER LAMP TEMP Description indicator indicator indicator The cooling fan is not operating. Please turn the power off, and allow the projector to Blinking cool down at least 20 minutes. After the projector has Turned Blinking sufficiently cooled down, please make confirmation...
  • Page 76: Phenomena That May Be Easy To Be Mistaken For Machine Defects

    Troubleshooting Phenomena that may be easy to be mistaken for machine defects WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet.
  • Page 77 Troubleshooting Phenomena that may be easily mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The signal cables are not correctly connected. Correctly connect the audio cables. The MUTE function is working. Restore the sound pressing the MUTE or VOLUME button on the remote control.
  • Page 78 Troubleshooting Phenomena that may be easily mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The FREEZE function is working. Video screen display freezes. Press the FREEZE button to restore the screen to normal. Color settings are not correctly adjusted. Colors have a 28, 30, Perform picture adjustments by changing the COLOR TEMP,...
  • Page 79: Warranty And After-Service

    Warranty and after-service / Specifications Warranty and after-service If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.
  • Page 80 Specifications Specifications (continued) [unit: mm] 403-9137WU-RJ-General-00...

Table of Contents