Dual XDM6810 Installation & Owner's Manual page 6

XDM6810
General Operation
6
OPERATION
Reset Press and hold for more than 2 seconds to RESET the unit
upon initial installation, when selecting between
US/European frequency spacing or if abnormal operation
occurs. The rest button is located behind the faceplate.
Audio Press AUDIO to select between Volume (default), Bass,
Treble, Balance & Fader.
Bass Press AUDIO until BAS appears
Rotate encoder left/right to adjust
(+10 maximum / -10 minimum)
Treble Press AUDIO until TRB appears
Rotate encoder left/right to adjust
(+10 maximum / -10 minimum)
Balance Press AUDIO until BAL appears
Rotate encoder left/right to adjust
(BAL 10L/BAL 10R) L=R represents equal balance.
Fader Press AUDIO until FAD appears
Rotate encoder left/right to adjust
(FAD 10F/FAD 10R) F=R represents equal fader.