Radio Basic Operations; Listening To The Radio; Manual Search - JVC KD-LX330R Instructions Manual

RADIO BASIC OPERATIONS

Listening to the radio

You can use either automatic searching or manual
searching to tune into a particular station.
Searching a station automatically:
Auto search
1
Select the band.
BAND
Each time you press and hold the button,
the FM band changes as follows:
FM1
Selected band appears.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
Press
stations of higher frequencies.
Press 4
stations of lower frequencies.
When a station is received, searching
8 stops.
B A N D SCM
7
SEL DISP MODE
BAND
1 Press SOURCE to select
FM or AM as the source.
2 If necessary, press and
hold MODE BAND to
select the FM band
number (FM1, FM2 or
FM3).
FM2 FM3
¢ to search
to search
KD-LX110R
MONO LOCAL INT RPT RND
8 9 10 11 12 SOURCE
T P / R D S PTY
To stop searching before a station is received,
press the same button you have pressed for
searching.
To tune in FM stations only with strong signals
1
Press MODE BAND.
"MODE" appears on the lower part of the display,
and the number buttons can work as different
function buttons.
2
Press LOCAL, while "MODE" is still on the display,
so that the LOCAL indicator lights up on the
display.
This function works only while searching FM
stations, including SSM preset (see page 9).
Each time you press the button, the LOCAL
indicator lights up and goes off alternately.
Searching a station manually:

Manual search

1
Select the band.
BAND
Each time you press and hold the button, the
FM band changes as follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
OFF
PTY
TP/RDS
1 Press SOURCE to select
FM or AM as the source.
2 If necessary, press and
hold MODE BAND to
select the FM band
number (FM1, FM2 or
FM3).
FM1 FM2 FM3