Dab Tuner Operations; Tuning Into An Ensemble And One Of The Services - JVC KD-LX330R Instructions Manual

We recommend that you use DAB (Digital Audio
Broadcasting) tuner KT-DB1500 with your unit.
If you have another DAB tuner, consult your JVC
IN-CAR ENTERTAINMENT dealer.
• Refer also to the Instructions supplied with your
DAB tuner.
What is DAB system?
DAB is one of the digital radio broadcasting
systems available today. It can deliver CD quality
sound without any annoying interference and
signal distortion. Furthermore, it can carry text,
pictures and data.
In contrast to FM broadcast, where each
programme is transmitted on its own frequency,
DAB combines several programmes (called
"services") to form one "ensemble."
With the DAB tuner connected with this unit,
you can enjoy these DAB services.

DAB TUNER OPERATIONS

SCM MONO LOCAL
BAND
7 8 9
SEL DISP MODE
BAND
KD-LX110R
INT RPT RND
10 11 12
SOURCE T P / R D S PTY
OFF
TP/RDS
Tuning into an ensemble and
one of the services
A typical ensemble has 6 or more programmes
(services) broadcast at the same time. After tuning
into an ensemble, you can select a service you
want to listen to.
1
Select the DAB tuner (DAB1–3).
2
Select the DAB band (DAB1, DAB2, or
DAB3).
BAND
Each time you press and hold the button,
the DAB band changes as follows:
DAB1
Note:
This receiver has three DAB bands (DAB1,
DAB2, DAB3). You can use any of them to tune
into an ensemble.
3
Start searching an ensemble.
Press
ensembles of higher frequencies.
Press 4
ensembles of lower frequencies.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
PTY
DAB2 DAB3
¢ to search
to search
33