Radio Basic Operations; Listening To The Radio - JVC KD-LX100 Instructions Manual

g
RADIO BASIC OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune into a particular station
Searchina a station automatically:
Auto search
7
2
8
Select the band.
l3l Press SOURCE to select
tuner as the source
q
If necessary, press BAND
repeatedly to select the
band
Each time you press the button, the band
changes as follows:
FMl-FM2-FM3-AM
Select&i band appears
Note
This receiver has three FM bands (FMI, FM2,
FM3) You can use any one of them to listen to an
FM broadcast
Start searching a station.
Press A ))1 to search
stations of higher frequencies
Press H V to search
stations of lower frequencies
'\ \
When a station is received, searching
stops
To stop searching before a station is received,
press the same button you have pressed for
searching
To tune in FM stations only with strong signals
1 Press MODE
"MODE"appears on the display, and the number
buttons can work as different function buttons
2 Press LOCAL, while "MODE" is still on the display,
so that the LOCAL indicator lights up on the
display
This function works only while searching FM
stations, including SSM preset (see page 9)
Each time you press the button, the LOCAL
indicator lights up and goes off alternately
Searchina a station manually:
Manual search
1 Select the band.
q
Press SOURCE to select
tuner as the source
q
If necessary, press BAND
repeatedly to select the
band
Each time you press the button, the band
changes as follows:
FMl-FM2-FM3-AM
Note
This receiver has three FM bands (FMI, FM2,
FM3) You can use any one of them to listen to an
FM broadcast