Storing Dab Services In Memory - JVC KD-LX330R Instructions Manual

4
Select a service you want to listen to.
BAND
To change the display information while
tuning into an ensemble
Normally service name is shown on the display.
If you want to check the ensemble name or its
frequency, press DISP (display).
Each time you press the button, the following
information appears for a while on the display.
Ensemble name
Channel number
To tune in a particular ensemble without
searching:
1
Press SOURCE to select DAB tuner as the
source.
2
Press MODE BAND repeatedly to select the
DAB band (DAB1, DAB2, or DAB3).
3
Press and hold
than 1 second.
¢ or 4
4
Press
ensemble you want is reached.
• If you hold down the button, the ensemble
keeps changing until you release the button.
34
1 Press MODE BAND.
"MODE" appears on the
display.
¢ or 4
2 Press
to select a service you
want, while "MODE" is
still on the display.
Service name
Frequency
¢ or 4
for more
repeatedly until the
Storing DAB services in
memory
You can preset up to 6 DAB services in each DAB
band (DAB1, DAB2 and DAB3) manually.
1
Select the DAB tuner (DAB1–3).
1 Press SOURCE to select
2 If necessary, press and
BAND
Each time you press and hold the button, the
DAB band changes as follows:
DAB1
2
Tune into an ensemble you want.
3
Select a service of the ensemble you
want.
1 Press MODE BAND.
BAND
2 Press
DAB tuner as the source.
hold MODE BAND
repeatedly to select the
DAB band number
(DAB1, DAB2 or DAB3).
DAB2 DAB3
"MODE" appears on the
display.
¢ or 4
to select a service you
want, while "MODE" is
still on the display.