2-2-5 ACPI Configuration
Suspend Mode
S1 (POS) :
Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 sleep
state, the system appears suspended and stays in a low power mode. The system can be
resumed at any time.
S3 (STR) :
Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state In S3 sleep
state, the system appears to be off and consumes less power than in the S1 state. When
signaled by a wake-up device or event, the system resumes to its working state exactly
where it was left off.
Auto :
Auto configuration.
Options available:S1 (POS)/S3 (STR)/Auto. Default setting is S1 (POS).
- 38 -
BIOS Setup