Onboard Peripherials Configuration; Watchdog Timer - Gigabyte MNIC8PI User Manual

2-5-3 Onboard Peripherials Configuration
Onboard LAN Control
Enable/Disable onboard LAN controller.
Options available: Enabled/Disabled. Default setting is Enabled.
Onboard LAN ROM Control
Select whether to enable the selected onboard LAN device. When enabled, device expansion ROM will
be initialized.
Options available: Enabled/Disabled. Default setting is Enabled.
Wake On LAN
Configure Wake On LAN setting.
Options available: By OS/Disabled. Default setting is By OS.
Restore on AC Power Loss
This option provides user to set the mode of operation if an AC / power loss occurs.
Power On:
System power state when AC cord is re-plugged.
Power Off: Do not power on system when AC power is back.
Last State: Set system to the last sate when AC power is removed.
Options available: Power On/Power Off/Last State. Default setting is Power Off.

Watchdog Timer

Enable/Disable Watchdog TImer function.
Options available: Enabled/Disabled. Default setting is Disabled.
Cover Removal Sensor
Enable/Disable chassis intrusion alter function.
Options available: Enabled/Disabled. Default setting is Disabled.
- 47 - BIOS Setup