Table of Contents
Advertisement
ACPI Configuration
Main
Advanced
PCIPnP
ACPI Settings
Suspend Mode
ACPI Version Features
ACPI APIC support
Resume On RTC Alarm
epost Video on S3 Resume
Suspend Mode
S1 (POS)
S3 (STR)
Auto
ACPI Version Features
Configure ACPI version features. Options available: ACPI v1.0, ACPI v2.0,
and ACPI v3.0. Default setting is ACPI v3.0.
ACPI APIC Support
Enabled
Disabled
BIOS SETUP UTILITY
Boot
Security
Chipset
[Auto]
[ACPI v3.0]
[Enabled]
[Disabled]
[No]
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
Enables the system to enter the ACPI S1 (Power on Suspend) sleep state.
In S1 sleep state, the system appears suspended and stays in a low power
mode. The system can be resumed at any time.
Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state
In S3 sleep state, the system appears to be off and consumes less
power than in the S1 state. When signaled by a wake-up device or event,
the system resumes to its working state exactly where it was left off.
Auto configuration. (default setting)
Enable ACPI APICsupport. (Default setting)
Disable ACPI APICsupport.
3 6
MNNM1PI Motherboard
Exit
Select Screen
Select Item
Change Field
+-
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
Advertisement
Table of Contents
