Uniden Oceanus DSC Series Owner's Manual page 9

UT01910ZZ_0 9/18/03
1. TX (Transmit) - Indicates transmitting.
2. HI (High) - Indicates transmit output is 25 Watts.
3. C - Indicates Canada Channel Mode.
4. DSC - Indicators the radio is in the DSC mode.
5. TRI (Triple Watch) - Indicates Triple Watch Mode is in effect.
6. MEM (Memory) - Indicates Memory Scan Mode status for each
channel selected.
7. (Alarm Icon) - It appears when the alarm clock is set.
8. LO (Low) - Indicates transmit output is 1 Watt.
9. U - Indicates US Channel Mode.
10. I - Indicates International Channel Mode.
11. WX - Indicate Weather Channel Mode has been activated.
12. ("ALT" Icon) - Indicates Weather Alert Mode has been
activated.
13. CH TAG - This area is used for Channel Tag, Menu, and message
of SAME, DSC, GPS, and frequency of weather channel. These
messages will continually scroll from right to the left.
14. (GPS Icon) - It appears while GPS module is receiving the
data.
15. (WHAM Icon) - It appears when it is connected to the control
unit of WHAM.
16. Channel Display - Indicates Channel Number in use.
5:37 PM Page 6
6