6. Choose E-mail from the drop down list and click 'Apply'
7. On the next screen that appears, enter in a 'Destination Name' (this is the
name of the user) and a 'Destination Address' (this is the users e-mail
address)
8. Click 'Apply' and log out of Admin Mode. You have now created your
Speed dial button. If a list of speed dials are to be created then do not log out
until you have finished.
For information regarding accessing the Destination addresses for
sending scans via the machine display panel – Please refer to the
relevant User Manual
Created by Printer Support
- 9 -
Konica Minolta Printer Support (UK)