Using The Audiobox With Popular Audio Applications - PRESONUS AudioBox iOne Owner's Manual

3.0 Connecting to a Computer or iOS Device
3.5

Using the AudioBox with Popular Audio Applications

3.5
Using the AudioBox with Popular Audio Applications
Apple Logic Pro/Express 7+
Steinberg Cubase 6+
16
Complete setup instructions for Studio One Artist and a brief tutorial on its
features can be found in chapter 4 of this manual. However, you can use
your AudioBox iOne or iTwo with almost any audio-recording application
that supports Core Audio (Mac OS X or iOS) or ASIO (Windows).
Although this chapter covers basic driver-setup instructions for four
popular audio applications, please consult the documentation provided
with your software for specific instructions on how to select the correct
AudioBox driver as the audio-device driver for your software.
1. Launch Logic Pro/Express.
2. Go to Logic | Preferences | Audio.
3. Click the Devices tab.
4. On the Core Audio tab, check Enabled.
Logic Pro X doesn't have a Core Audio tab, but make sure Core Audio is
enabled. The checkbox will be blue with a white checkmark in it.
5. Depending on which interface you have, select PreSonus AudioBox iOne or
PreSonus AudioBox iTwo from the Output Device and Input Device menus.
6. Click the Apply Changes button.
In Logic Pro X., Logic's Core Audio functionality will reinitialize on
its own as soon as you click the Apply Changes button.
7. You will be asked if you'd like to relaunch Logic. Click "try (re) launch. "
8. Close the Preferences window.
9. Your AudioBox features custom I/O labels for faster workflow.
To enable these labels for use in Logic:
• Go to Options | Audio | I/O Labels.
• In Logic Pro X, open a session file and go to Mix | I/O Labels, or
from within the Mixer window go to Options | I/O Labels.
• The second column in the window is named "Provided by Driver. " Activate each
of these labels for your AudioBox. When you are done, close this window.
10. You're now ready to use your AudioBox interface.
1. Launch Cubase.
2. Go to Devices | Device Setup.
3. Select "VST Audio System" from the Devices column in the Device Setup.
4. Depending on which interface you have, select PreSonus AudioBox iOne
or PreSonus AudioBox iTwo from the ASIO Driver drop-down list.
5. Click "Switch" to begin using the AudioBox driver.
6. Once you've successfully changed the driver, go to Devices | VST
Connections to enable your input and output buses.
7. You're now ready to use your AudioBox interface.
AudioBox iOne and iTwo
™
Owner's Manual