Using The Studio-Series Interfaces With Popular Audio Applications - PRESONUS Studio 1824 Owner's Manual

3 Connecting to a Computer
3.4

Using the Studio-series interfaces with Popular Audio Applications

3.4 Using the Studio-series interfaces with Popular Audio Applications
Ableton Live
Apple Logic
Universal Control is designed to verify that your Studio-series
interface has the correct firmware version installed. You will be
prompted if your Studio-series interface needs its firmware updated.
Click on the Update Firmware button to begin the update.
WARNING: Do not power off or disconnect your Studio-series interface during
the firmware update. Once the firmware update is successfully completed, you
will be alerted and instructed to reboot your device.
Complete setup instructions for Studio One Artist and a brief tutorial on
its features can be found in Section 5 of this manual. However, you can
use your Studio-series interfaces with any audio-recording application
that supports Core Audio or ASIO. Please consult the documentation that
came with your audio application for specific instructions on how to select
the Studio-series driver as the audio-device driver for your software.
Below are basic driver-setup instructions for a few popular audio applications.
1. Launch Ableton Live
2. Go to Options | Preferences | Audio
3. Choose Driver Type: Asio | Audio Device: ASIO PreSonus Studio (1824 or 1810)
4. Go to Input Config: Enable and select the desired Input channels.
5. Go to Output Config: Enable and select the desired Output channels.
1. Launch Logic.
2. Go to Logic | Preferences | Audio.
3. Click on the Devices Tab.
4. Select PreSonus Studio (1824 or 1810) from the device menu.
5. You will be asked if you'd like to relaunch Logic. Click try (re)launch.
6. Your Studio-series interface features custom I/O labels for faster workflow. To
enable these labels for use in Logic, go to Options | Audio | I/O Labels.
7. The second column in the pop-up window will be named Provided by Driver.
Activate each of these labels for your Studio-series interface. When you are done,
close this window.
Studio Series 1810 and 1824
Owner's Manual
10