Boss Audio Systems 750DI User Manual page 7

Mp3-compatible in-dash digital media receiver with built-in ipod docking station with usb and sd memory card ports and front panel aux input
Hide thumbs Also See for 750DI:
Table of Contents

Advertisement

General and Radio Controls
711OD1
MP3-COMPATIBLE DIQITAL MEDIA RECEIVER
8
o
AUXINJACK
This jack is a convenient way to play music
from an MP3 music player such as an iPod
through your car stereo.
CD
VOLUME UPIDOWN KNOB (tum)
AUDIO MODE SELECTOR (push)
In normal mode, use this knob to increase
or decrease the volume level.
To access the various sound parameters
push the knob (like a button) to cycle
through the following adjustable settings:
VOLUME> BASS> TREBLE> BALANCE
> FADER> LOUD(NESS) > EQUALIZER
Use the knob to increase or decrease the
settings for Volume,
Bass,
Treble, Balance
and Fader.
For Loudness, tum the knob to change it
from LOUD ON to LOUD OFF.
For Equalizer, rotate the knob to cycle
through and select the response curve
you wish: FLAT, POPS, ROCK or CLASSIC.
To save a setting, press the knob and
move on to the next parameter.You can
exit the system by pressing until you retum
to VOL, or simply do nothing and the unit
will return to normal mode automatically.
®
POWER/MUTE
Press POWER to tum unit on. Press the
button to MUTE the audio. Press and
hold POWER to tum it off.
@)
MODE (Input Select)
Press this button repeatedly to cycle
through the audio input sources:
RADIO> USB> SD CARD>
AUXIN> iPod
Plea_note:
iPod Mode can only
be
selected if an
iPod is present in
the
dock.
Simply connect the headphone output of
the MP3 player to this input jack, and press
MODE button to select AUX as input source
and begin playing music on the MP3 player.
Please
note:
AUX IN Mode can only
be
selected
if
it is
enabled
in
the System
Settings.
"YDU.arehaving problems witflAUX IN
mode,
please seepage
12
to check
the
settings.
®
RADIO PRESETS 1-6
These buttons are used to store the
presets for radio stations. To set a
preset, tune to the desired radio station.
Then press and hold the preset to which
you wish to assign that station for more
than one second and release. To replace
it with a different station, repeat the
process and the new setting will override
the previous one.
®
BAND
Press briefly, repeatedly to cycle
between the five radio bands:
FM1>FM2>FM3>AM1>AM2
(1)
TUNE/SEEK UP/DOWN BUTTONS
Press these buttons briefly to step up or
down the radio dial in single step
increments. Press and hold for more than
one-half second and the tuner will enter
the SEEK mode. In this mode the tuner
will stop at the next strong station
available.
®
CLOCK
Press to display or adjust the clock. See
instruGtions elsewhere in this manual for
setting the time.
75001
user's
Manual -
page
6

Advertisement

Table of Contents
loading

Table of Contents