Table of Contents
Advertisement
iPod Dock adaptors
The 75001 comes with a set of special iPod adaptors which fit a wide range of iPod
models. These are specially designed for use with the 75001, and hold the iPod firmly
to the dock connector when the vehicle is in motion.
Please install the appropriate dock adaptor as described below.
PLEASE NOTE: .
"Official" Apple Universal Dock Adaptors cannot
be
used in the 75001.
Do not attempt to connect your iPod to
the
dock without
the
appropriate, specially-designed
adaptor provided
with
the 75001.
BOSS Audio Systems cannot accept any responsibility for any damage or data loss that
may result from using your iPod in the 75001 and the specially-designed dock adaptors.
1.
Push on the face of the LCD to release
and open the iPod docking drawer.
Dockadaptor------~
2. Select the appropriate size dock adaptor
for your iPod. Lower it into the recess in
the drawer, aligning the notches/tabs on
the FRONT edge first.
Slots on top edge of faceplate - -.......
3. As you lower the dock into the recess,
be sure to align the tabs on the REAR edge
of the dock adaptor with the slots on the
top edge of the faceplate, and slide it down
securely into place.
4. Insert your iPod into the dock adaptor.
Press PLAY/PAUSE to begin playback.
75001 User's Manual - page 4
Advertisement
Table of Contents
