Electrical Power Requirements
The power requirements for this treadmill are a grounded, dedicated circuit rated for one of the
following:
100 VAC, 50/60 Hz, 20A
•
115 VAC, 50/60 Hz, 20A
•
208 VAC, 60 Hz, 15A
•
Contact a qualified electrician to ensure the power supply complies with local building codes.
WARNING: Shock and electrocution hazard.
Connect unit to a grounded outlet.
•
Do not use voltage adapter or extension cord.
•
625T Assembly
The words "left" and "right" denote the user's orientation.
Read and understand all instructions thoroughly before assembling the unit.
Verify correct package
1. Read box label to verify the model number and voltage match what was ordered.
2. Lift and remove cardboard sleeve surrounding unit.
3. Verify paint color matches what was ordered.
Verify correct voltage by reading voltage sticker near power outlet.
Tools Required
Phillips screwdriver
•
Long 3/8" drive socket extension
•
3/4" Open end wrench
•
7/32" Allen wrench (included)
•
9/16" Open end wrench
•
14 mm Open end wrench
•
Two people will be required for this procedure. It is the responsibility of the facility owner/owner of the
equipment to ensure that there is appropriate clearance around each machine to allow for safe use
and passage.
Cybex Owner's Manual
220 VAC, 60 Hz, 15A
•
230 VAC, 50 Hz, 13A, UK
•
14