Table of Contents
Advertisement
Do not install the treadmill in an area of high humidity, such as in the vicinity of a steam room, sauna,
indoor pool, or outdoors. Exposure to extensive water vapor, chlorine, and/or bromine could adversely
affect the electronics as well as other parts of the machine.
Electrical Power Requirements
The power requirements for this treadmill are a grounded, dedicated circuit rated for one of the
following:
100 VAC, 50/60 Hz, 20A
•
115 VAC, 60 Hz, 20A
•
208 VAC, 60 Hz, 15A
•
220 VAC, 60 Hz, 15A
•
•
230 VAC, 50 Hz, 13A, UK
•
240 VAC, 50 Hz, 15A
Contact a qualified electrician to ensure the power supply complies with local building codes.
Do not use a ground plug adapter to adapt the 3-prong power cord plug to a non-grounded electrical
outlet. Do not use an extension cord.
770T-CT Assembly
The words "left" and "right" denote the treadmill user's orientation.
Read and understand all instructions thoroughly before assembling the treadmill.
Verify you have received the correct package.
1.
Read box label to verify the model number and voltage (optional) match what was ordered.
2.
Lift and remove cardboard sleeve surrounding unit.
3.
Verify paint color matches what was ordered.
Tools Required
•
Phillips screwdriver
•
Long 3/8" drive socket extension
•
3/4" Open end wrench
•
7/32" Allen wrench (included)
•
14 mm Open end wrench
Two people will be required for this procedure. It is the responsibility of the facility owner/owner of the
equipment to ensure that there is appropriate clearance around each machine to allow for safe use
and passage.
Cybex 770T-CT Treadmill Owner's Manual
18
Advertisement
Table of Contents
