Headset (Optional); Lanyard/Strap Eyelet - Panasonic KX-TG3021C Operating Instructions Manual

TG302X_303XC(e).book Page 39 Monday, December 25, 2006 1:30 PM
To remove the wall mounting adaptor
While pushing down the lever (A),
remove the adaptor (B).
A
Charger
Available model:
KX-TG3023/KX-TG3024/KX-TG3032/
KX-TG3033
1
Drive the screws (not included) into
the wall.
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
2
Mount the charger (A), then slide it
down (B) and to the right (C) until it
is secure.
A
B

Headset (optional)

Connecting a headset to the handset
allows hands-free phone
conversations. We recommend using
the Panasonic headset noted on page
5.
B
L Headset shown is RP-TCA86.
Switching a call between the headset
and handset speakerphone
To switch to the handset speakerphone,
press {s}.
To return to the headset, press {C}.

Lanyard/strap eyelet

If you have a lanyard/strap (not
included), you can hang your handset
from your neck or wrist. Thread it
through the eyelet as shown and pull to
tighten it.
C
Useful Information
39