Using A Bluetooth Headset (Optional) - Panasonic KX-TGF973 Operating Instructions Manual

Using Bluetooth® Devices
disconnect your cellular phone from the
base unit.
R The compatible voice commands depends
on the cellular phone voice recognition
feature.
Using a Bluetooth headset
(optional)
By pairing a Bluetooth headset to the base
unit, you can enjoy hands-free conversations
when talking on landline calls.
Important:
R Your Bluetooth headset must support the
HeadSet Profile (HSP) specification.
R Only 1 Bluetooth headset can be paired to
the base unit.
R Only 1 Bluetooth device can be used with
*1
the unit at a time .
R For best performance, we recommend
using your Bluetooth headset within 1 m
(3.3 feet) of the base unit. The base unit
can communicate with Bluetooth headsets
within an approximately 10 m (33 feet)
range.
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
Pairing a Bluetooth headset to
the base unit
Important:
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Bluetooth headset:
Set your headset to pairing mode.
R Refer to the headset's operating
instructions.
2
Handset:
MMENUN#621
3
If your headset PIN is "0000", go to
step 4.
If your headset PIN is not "0000",
press MCLEARN, then enter your
headset's PIN.
R Typically, default PIN is "0000". Refer
to the headset's operating instructions.
For assistance, please visit http://shop.panasonic.com/support
74
KX-TGF97xUSA(en-us)_0928_ver121.pdf 74
4
Press MOKN, then wait until a long beep
sounds.
5
MOFFN
R When is displayed on the base
unit, the headset is available for use.
Connecting/disconnecting a
Bluetooth headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the unit.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
Handset / Base unit
1
To connect/disconnect:
MMENUN#622
R A long beep sounds.
2
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Unpairing a Bluetooth headset
You can cancel a pairing of the headset that is
stored to the base unit.
Handset
1
MMENUN#612
2
MbN: "Yes" a MSELECTN
R When the headset is unpaired, the
disappears from the base unit
display.
3
MOFFN
Operating a Bluetooth headset
using a landline
Important:
R Refer to your headset's operating
instructions for details.
R Some features described here may not be
available depending on Bluetooth headset.
9/28/2022 11:24:42 AM