Customer Support - Panasonic KX-TG3021C Operating Instructions Manual

2.4 ghz expandable digital cordless phone /with 3 handsets; 2.4 ghz digital cordless phone with 4 handsets; 2.4 ghz expandable digital cordless answering system /w 2 or 3 handsets

Hide thumbs

Table Of Contents

Table of Contents

TG302X_303XC(e).book Page 27 Monday, December 25, 2006 1:30 PM

Feature

code

Voice prompt

{0}{8}{2}

(Change language)

*1 If "System setting" column is checked, you do not need to program the same item

using another handset.

*2 If you subscribe to Call Display service and want to view the caller's information

after lifting up the handset to answer a call, turn off this feature.

*3 Turn this feature off if you prefer not to hear key tones while you are dialing or

pressing any keys, including confirmation tones and error tones.

*4 If you subscribe to a distinctive ring service, select a tone (tone 1 to 3). If you

select a melody, you cannot distinguish lines by their ringers.

*5 The flash time depends on your telephone exchange or host PBX. Consult your

PBX supplier if necessary.

*6 Generally, the line mode setting should not be adjusted. If "Line in use" is not

displayed when another phone connected to the same line is in use, you need to

change the line mode to "A".

*7 This feature allows the unit to automatically adjust the date and time setting when

caller information is received. To use this feature, set the date and time first.

Alarm

An alarm will sound once for 3 minutes at the set time.

Set the date and time beforehand (page 14).

{MENU} i {8}

{V}/{^}: "Once" i {Select}

L To turn off the alarm, select "Off". i {Select} i {OFF}

Set the desired date and time. i {Save}

{V}/{^}: Select the desired ringer tone. i {Save}

L We recommend selecting a different ringer tone from outside call.

{OFF}

Note:

L To stop the alarm, press any dial key or place the handset on the base unit or

charger.

L When the handset is in use, the alarm will not sound until the handset is in standby

mode.