Seat Removal; Central Tunnel Removal - APRILIA Atlantic 500 Workshop Manual

Cycle parts

SEAT REMOVAL

Place the vehicle on the central stand.
Lift up the seat (4) (see UNLOCKING/LOCKING THE
SEAT).
CAUTION
Work with care.
Utilising a suitable pincer, unclip the clip (5).
CAUTION
Prop up the seat do make sure it does not fall
unexpectedly.
Remove the pin (6).
Unscrew and remove the four nuts (7).
Remove the seat (4).

CENTRAL TUNNEL REMOVAL

Place the vehicle on the central stand.
Remove the seat (see SEAT REMOVAL).
Remove the right and left inspection covers (see
RIGHT AND LEFT INSPECTION COVER REMOVAL).
Remove the legshield (see LEGSHIELD REMOVAL).
CAUTION
Work with care. Do not damage the tongue and/or
the relative seats. Handle the painted components
with care. Do not drag them or ruin them.
Unscrew and remove the two screws (1) on the right
and left side.
Unscrew and remove the screw (2) on the right and
left side.
Remove the central tunnel (3).
chap. 7
4
5
3
Release 00 2002-09
Atlantic 500
7
6
1
2
3
7
7-3