Head Cover Removal; Front Head; Removing Camshafts - APRILIA RSV4 Factory Service Station Manual

Engine

Head cover removal

•
Unscrew and remove the three screws
with rubber washers.
•
Remove the head cover together with
the sealing gasket.
When refitting: spread a layer of sealing paste on
the external corners of the head
DURING REFITTING REPLACE THE GASKET WITH A NEW
ONE OF THE SAME TYPE.
Recommended products
Three bond Sealing paste
-

Front head

Removing camshafts

•
Remove both head covers, the alter-
nator side cover and remove the cap
on the clutch cover in order to rotate
the crankshaft.
•
Remove the O ring.
See also
Head cover removal
Removing the flywheel cover
ENG - 276
RSV4 Factory