Setup Error Messages - Oce 1000C Job Management Manual

C
C-5 Troubleshooting
Mac OS users may be unable to connect to the Océ 1000C if a network administrator
has assigned it to a different zone or added zones where previously there were none.
If you have configured the Océ 1000C and set up client computers and network
servers according to guidelines in the
Installation
WorkStation LE, choose Print Pages from the Server menu).
If you can print the Test Page but still cannot print a document from a remote
computer, contact the system administrator to troubleshoot the network connection.
If you cannot connect or print the Test Page, check the printer's touch panel display.
If this happens
The printer is not in
Standby mode.
You still cannot print a
Test Page.

Setup error messages

For information on Setup error messages, see the
Guide, try printing a Test Page (in Command WorkStation or Command
The printer's Automatic Power-Off function may have shut
down the printer.
Turn the printer on, and try printing a Test Page again when
the printer has warmed up.
Make a copy. If you can make a copy, restart the Océ 1000C,
and when you see Idle on the status line of the Océ 1000C
display, try printing a Test Page again. If the Test Page still
fails to print, contact your authorized service/support center.
Configuration Guide and the
Try this
Configuration
User Software
Guide.