Shutting Down The Océ 1000C - Oce 1000C Job Management Manual

8
8-6 Using FieryBar
Shutting down the Océ 1000C
You may need to shut down the Océ 1000C for service. When you do so, fonts that
have been downloaded to the hard disk are not deleted. Print jobs in the Hold and
Printed queues and jobs that have been processed but not printed are not deleted and
are available for printing when you restart the Océ 1000C.
T O 1000C
O SHUT DOWN THE CÉ
1. Make sure the Océ 1000C is not receiving, processing, or printing a job.
Make sure that both the RIPping and Printing areas on FieryBar read Idle. If a job has
just finished processing or printing, wait at least five seconds after the RIPping and
Printing areas switch to Idle before proceeding to the next step.
If the Océ 1000C is receiving, processing, or printing a job when you shut it
N :
OTE
down, it will not automatically finish doing so when you restart it. Instead, you must
resubmit the job after it has restarted.
2. Click Start on the Windows taskbar and choose Shut Down.
3. Select Shut Down and click Yes.