D-Link DFL-1660 User Manual page 591

roaming clients setup, 422
troubleshooting, 483
tunnel establishment, 444
tunnels, 444
IPsec Before Rules setting, 460
usage, 444
IPsec Certificate Cache Max setting, 461
IPsec Gateway Name Cache Time setting, 461
IPsec Max Rules setting, 459
IPsec Max Tunnels setting, 460
IPv6, 94
adding an address, 94
all-nets6 address object, 97
and management access, 98
and transparent mode, 99
enabling globally, 95
enabling on an interface, 95
enabling router advertisement, 96
grouping with IPv4, 96
ICMP service, 98
in IP rules, 139
in routing rules, 189
neighbor discovery, 97
proxy neighbor discovery, 97
with high availability, 99
with the ping command, 98
ip validation
with config mode, 450
L
L2TP, 463
advanced settings, 469
client, 469
DHCP client IP issue, 465
quick start guide, 425
server, 464
L2TP Before Rules setting, 469
L3 Cache Size setting, 252
LAN to LAN tunnels, 446
quick start guide, 420, 421
Large Buffers (reassembly) setting, 572
Layer Size Consistency setting, 553
LDAP
authentication, 395
authentication with PPP, 400
MS Active Directory, 396
servers, 451
link monitor, 72
initializing NICs, 72
Reconf Failover Time, 73
with high availability, 542
link state algorithms, 199
Local Console Timeout setting, 53
local IP address in routes, 170
Log ARP Resolve Failure setting, 135
Log Checksum Errors setting, 552
Log Connections setting, 562
Log Connection Usage setting, 563
logging, 60
advanced settings, 65
memlog, 61
message exceptions, 63
severity filter, 63
SNMP traps, 63
syslog, 61
login authentication, 402
log messages, 60
Log non IPv4/IPv6 setting, 552
Log Open Fails setting, 562
Logout at shutdown (RADIUS) setting, 70, 71
logout from CLI, 44
Log Oversized Packets setting, 567
Log Received TTL 0 setting, 552
Log Reverse Opens setting, 562
Log State Violations setting, 562
loopback interfaces, 108, 109
Low Broadcast TTL Action setting, 555
M
MAC address, 128
authentication, 406
in the address book, 91
with ARP, 128
with ARP publish, 130
management interfaces, 29
advanced settings, 53
and IPv6, 98
configuring remote access, 44
VPN routing problem, 35
managing NetDefendOS, 29
Max AH Length setting, 566
Max Auto Routes (DHCP) setting, 264
Max Concurrent (reassembly) setting, 572
Max Connections (reassembly) setting, 573
Max Connections setting, 563
Max ESP Length setting, 566
Max GRE Length setting, 566
Max Hops (DHCP) setting, 263
Max ICMP Length setting, 566
Max IPIP/FWZ Length setting, 567
Max IPsec IPComp Length setting, 567
Max L2TP Length setting, 567
Max lease Time (DHCP) setting, 263
Max Memory (reassembly) setting, 573
Max OSPF Length setting, 567
Max Other Length setting, 567
Max Pipe Users setting, 573
Max PPM (DHCP) setting, 263
Max PPP Resends setting, 469
Max Radius Contexts setting, 71
Max Reassembly Time Limit setting, 570
max sessions
services parameter, 103
Max Size (reassembly) setting, 572
Max SKIP Length setting, 567
Max TCP Length setting, 566
Max time drift setting, 161
Max Transactions (DHCP) setting, 263
Max UDP Length setting, 566
memlog, 61
Memory Log Repetition setting, 79
memory monitoring settings, 79
Memory Poll Interval setting, 79
Memory Use Percent setting, 79
591
Alphabetical Index