Using An Identity List - D-Link DFL-1660 User Manual

9.3.8. Identification Lists
Example 9.3. Using an Identity List
This example shows how to create and use an Identification List for use in the VPN tunnel. This Identification List
will contain one ID with the type DN, distinguished name, as the primary identifier. Note that this example does
not illustrate how to add the specific IPsec tunnel object.
Command-Line Interface
First create an Identification List:
gw-world:/> add IDList MyIDList
Then, create an ID:
gw-world:/> cc IDList MyIDList
gw-world:/MyIDList> add ID JohnDoe
gw-world:/MyIDList> cc
Finally, apply the Identification List to the IPsec tunnel:
gw-world:/> set Interface IPsecTunnel MyIPsecTunnel
Web Interface
First create an Identification List:
1. Go to: Objects > VPN Objects > IKE ID Lists > Add > ID List
2. Enter a name for the list, for example MyIDList
3. Click OK
Then, create an ID:
1. Go to: Objects > VPN Objects > IKE ID Lists > Add > ID List
2. Select MyIDList
3. Enter a name for the ID, for example JohnDoe
4. Select Distinguished name in the Type control
5. Now enter:
• Common Name: John Doe
• Organization Name: D-Link
• Organizational Unit: Support
• Country: Sweden
• Email Address: john.doe@D-Link.com
6. Click OK
Type=DistinguishedName
CommonName="John Doe"
OrganizationName=D-Link
OrganizationalUnit=Support
Country=Sweden
EmailAddress=john.doe@D-Link.com
AuthMethod=Certificate
IDList=MyIDList
RootCertificates=AdminCert
GatewayCertificate=AdminCert
442
Chapter 9. VPN