D-Link DFL-1660 User Manual page 238

4.6.4. Advanced IGMP Settings
Chapter 4. Routing
IGMP messages with a version lower than this will be logged and ignored. Global setting on
interfaces without an overriding IGMP Setting.
Default: IGMPv1
IGMP Router Version
The IGMP protocol version that will be globally used on interfaces without a configured IGMP
Setting. Multiple querying IGMP routers on the same network must use the same IGMP version.
Global setting on interfaces without an overriding IGMP Setting.
Default: IGMPv3
IGMP Last Member Query Interval
The maximum time in milliseconds until a host has to send an answer to a group or
group-and-source specific query. Global setting on interfaces without an overriding IGMP Setting.
Default: 5,000
IGMP Max Total Requests
The maximum global number of IGMP messages to process each second.
Default: 1000
IGMP Max Interface Requests
The maximum number of requests per interface and second. Global setting on interfaces without an
overriding IGMP Setting.
Default: 100
IGMP Query Interval
The interval in milliseconds between General Queries sent by the device to refresh its IGMP state.
Global setting on interfaces without an overriding IGMP Setting.
Default: 125,000
IGMP Query Response Interval
The maximum time in milliseconds until a host has to send a reply to a query. Global setting on
interfaces without an overriding IGMP Setting.
Default: 10,000
IGMP Robustness Variable
IGMP is robust to (IGMP Robustness Variable - 1) packet losses. Global setting on interfaces
without an overriding IGMP Setting.
Default: 2
IGMP Startup Query Count
238