If1 Configuration - D-Link DFL-1660 User Manual

4.6.3. IGMP Configuration
• Destination Network: auto
• Multicast Source: 192.168.10.1
• Multicast Group: 239.192.10.0/24
4. Click OK
4.6.3.2. IGMP Rules Configuration - Address Translation
The following examples illustrates the IGMP rules needed to configure IGMP according to the
Address Translation scenario described above in Section 4.6.2.2, "Multicast Forwarding - Address
Translation Scenario". We need two IGMP report rules, one for each client interface. The interface
if1 uses no address translation and if2 translates the multicast group to 237.192.10.0/24. We also
need two query rules, one for the translated address and interface, and one for the original address
towards if1.
Two examples are provided, one for each pair of report and query rule. The upstream multicast
router uses IP UpstreamRouterIP.
Example 4.18. if1 Configuration
The following steps needs to be executed to create the report and query rule pair for if1 which uses no address
translation.
Web Interface
A. Create the first IGMP Rule:
1. Go to: Network > Routing > IGMP Rules > Add > IGMP Rule
2. Under General enter:
• Name: A suitable name for the rule, for example Reports_if1
• Type: Report
• Action: Proxy
• Output: wan (this is the relay interface)
3. Under Address Filter enter:
• Source Interface: if1
• Source Network: if1net
• Destination Interface: core
• Destination Network: auto
• Multicast Source: 192.168.10.1
• Multicast Group: 239.192.10.0/24
4. Click OK
B. Create the second IGMP Rule:
1. Again, go to: Network > Routing > IGMP Rules > Add > IGMP Rule
2. Under General enter:
235
Chapter 4. Routing